The bios version is xxx.O17.
You can see my screen shot below.
Enough to got MAX cpu clock By my LN2 settings.
As a result, I got about 6.85g(cinebench & Wprime1024) and 6.94g(gpu pi).
At that point of time, Vcore is 1.75~1.77v
And No touch others voltage(st or stv6 or CPU PLLs). I had only adjust vcore.
In my case, If I adjust ST, ST6V and CPU PLLs in BIOS
After booting, Then I got debug "00"
Fortunately, If I can enter the OS and I cant run bench.
Add.
My LN2 sequence.
1. After My normal bios setting, Boot on
-> If Ok
2. Trun off my system.
3. LN2 jumper On
4. I do below -145 degree.
5. Trun On my system.
6. After in bios, LN2 bios setting
7. Save and reset.
-> If Ok
6. Enjoy LN2 bench🤔😄
Anyway,I will do upload my LN2 scores.
Good Luck MSI Guy's😄
