MSI Z390 Godllke with LN2 Tips

I share my LN2 settings for z390 godlike (No CB,CBB)
The bios version is xxx.O17.
You can see my screen shot below.

Enough to got MAX cpu clock By my LN2 settings.
As a result, I got about 6.85g(cinebench &  Wprime1024) and 6.94g(gpu pi).
At that point of time,  Vcore is 1.75~1.77v
And No touch others voltage(st or stv6 or CPU PLLs). I had only adjust vcore.

In my case, If I adjust ST, ST6V and CPU PLLs in BIOS
After booting, Then I got debug "00"
Fortunately, If I can enter the OS and I cant run bench.

Add.
My LN2 sequence.
1. After My normal bios setting, Boot on
     -> If Ok
2. Trun off my system.
3. LN2 jumper On
4. I do below -145 degree.
5. Trun On my system.
6. After in bios, LN2 bios setting
7. Save and reset.
   -> If Ok
6. Enjoy LN2 bench🤔😄

Anyway,I will do upload my LN2 scores.

Good Luck MSI Guy's😄

Z170 & Z270 mod for 8700k

https://m.facebook.com/story.php?story_fbid=2046008318997408&id=100007647784562

MSI X470 Gaming M7 with Ryzen 2700X OC

Vcore : 1.32V / V1P8 : 1.95V / Vdimm : 1.65V














LN2 결과


http://hwbot.org/submission/3843863_


http://hwbot.org/submission/3843864_


http://hwbot.org/submission/3843522_

MSI X299 OC tip

1. X299 Xpower

i9-7980XE사용시  Vdimm 1.67v 이상 인가시 memory 퀴드 채널이 되지않음.
Limit : Vdimm 1.66V / mem clock 1800 / sa 1.25v , io 1.2v/ cl12-11-11-28 1t

(윈도우 진입등 간단한 벤치는 가능하나 안정성을 위해 윈도우 진입후 1.75v 인가필요)

 

 

 

1. X299m gaming

i9-7900XE사용시 고 메모리 클럭에서  Uncore voltage +0.25v 필요
Limit : Vdimm 1.85V / mem clock 1900 / cl12-11-11-28 1t /sa 1.25v , io 1.2v / Uncore voltage +0.25

memmex in window 7 / 8 / 10 for X299

 Maxmem in Windows 7 / 8 / 10

I recently had some trouble getting maxmem to work in my Windows 10. If I set maxmem in msconfig to e.g. 4000 it always resulted in 1.5 GB after reboot. I tried several things and in the end I found that this is working:

Run CMD as admin and use this command line:

bcdedit /set removememory 27000

27000 will remove 27000 MB of the available memory. Using 32 GB you will have ~5.5 GB with this maxmem setting.

Maybe you are all already aware of this but in case you had the same problem it might help you.

Super pi 32M on kabylake

참조

HWBOT PRIME

http://forum.hwbot.org/showthread.php?t=153956