2018년 11월 11일 일요일
The bios version is xxx.O17.
You can see my screen shot below.
Enough to got MAX cpu clock By my LN2 settings.
As a result, I got about 6.85g(cinebench & Wprime1024) and 6.94g(gpu pi).
At that point of time, Vcore is 1.75~1.77v
And No touch others voltage(st or stv6 or CPU PLLs). I had only adjust vcore.
In my case, If I adjust ST, ST6V and CPU PLLs in BIOS
After booting, Then I got debug "00"
Fortunately, If I can enter the OS and I cant run bench.
My LN2 sequence.
1. After My normal bios setting, Boot on
-> If Ok
2. Trun off my system.
3. LN2 jumper On
4. I do below -145 degree.
5. Trun On my system.
6. After in bios, LN2 bios setting
7. Save and reset.
-> If Ok
6. Enjoy LN2 bench🤔😄
Anyway,I will do upload my LN2 scores.
Good Luck MSI Guy's😄
2018년 5월 28일 월요일
2018년 5월 1일 화요일
2017년 12월 12일 화요일
Limit : Vdimm 1.66V / mem clock 1800 / sa 1.25v , io 1.2v/ cl12-11-11-28 1t
2017년 8월 14일 월요일
Maxmem in Windows 7 / 8 / 10
I recently had some trouble getting maxmem to work in my Windows 10. If I set maxmem in msconfig to e.g. 4000 it always resulted in 1.5 GB after reboot. I tried several things and in the end I found that this is working:
Run CMD as admin and use this command line:
bcdedit /set removememory 27000
27000 will remove 27000 MB of the available memory. Using 32 GB you will have ~5.5 GB with this maxmem setting.
Maybe you are all already aware of this but in case you had the same problem it might help you.