2018년 11월 11일 일요일

MSI Z390 Godllke with LN2 Tips

I share my LN2 settings for z390 godlike (No CB,CBB)
The bios version is xxx.O17.
You can see my screen shot below.

Enough to got MAX cpu clock By my LN2 settings.
As a result, I got about 6.85g(cinebench &  Wprime1024) and 6.94g(gpu pi).
At that point of time,  Vcore is 1.75~1.77v
And No touch others voltage(st or stv6 or CPU PLLs). I had only adjust vcore.

In my case, If I adjust ST, ST6V and CPU PLLs in BIOS
After booting, Then I got debug "00"
Fortunately, If I can enter the OS and I cant run bench.

Add.
My LN2 sequence.
1. After My normal bios setting, Boot on
     -> If Ok
2. Trun off my system.
3. LN2 jumper On
4. I do below -145 degree.
5. Trun On my system.
6. After in bios, LN2 bios setting
7. Save and reset.
   -> If Ok
6. Enjoy LN2 bench🤔😄

Anyway,I will do upload my LN2 scores.

Good Luck MSI Guy's😄